Victron Energy Lynx Smart BMS

Home > Brands > Victron Energy >

Alternative Views:

Product Code: LYN034160200

EMAIL FOR QUOTE

Description

Why Buy It?

Technical Specs

Our 6 store locations may sell for less if you are able to pick up your battery.

For Dealer and volume purchase enquirers CLICK HERE.

All requests for quotation will be processed within 24hrs eastern standard time, please indicate part, quantity required and your shipping destination commercial quotations.

* Includes shipping to any Canadian provinces except Quebec and the Territories, please contact online for shipping information to those locations.

The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option. Its main features are:

Built-in 500A contactor, used as a fall-back safety mechanism and also available as a remote controllable main systems switch
Battery monitor, indicating state of charge percentage and more data.
Pre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell.

Lynx Smart BMS
POWER
Supply voltage range	9 - 58 Vdc
Supported system voltages	12, 24 or 48V
Reverse polarity protection	No
Main safety contactor continuous current rating	500Adc continuous
Main safety contactor peak current rating	600A for 5 minutes
Power consumption hibernate or standby mode	Approximately 10.4mW (0.8mA at 13V)
Power consumption in active mode	Approximately 2.6W (200mA at 13V) depending on the state of the relays
Minimum load resistance for pre-charging	10Ω and above for 12V systems 20Ω and above for 24V and 48V systems
AUX output maximum current rating	1.1A continuous, protected by resettable fuse
Allow-to-charge port Maximum current rating	0.5A at 60Vdc, protected by resettable fuse
Allow-to-discharge port Maximum current rating	0.5A at 60Vdc, protected by resettable fuse
Alarm relay (SPDT) Maximum current rating	2A at 60Vdc
CONNECTIONS
Busbar	M8
VE.Can	RJ45 and RJ45 terminator
I/O	Screw terminals
Battery BMS cables	Male and female circular 3-pole connector with M8 screw ring
Lynx distributor (up to 4 modules)	RJ10 (cable ships with each Lynx Distributor)
PHYSICAL
Enclosure material	ABS
Enclosure dimensions (h x w x d)	190 x 180 x 80 mm
Unit weight	1.9 kg
Busbar material	Tinned copper
Busbar dimensions (h x w)	8 x 30 mm
ENVIRONMENTAL
Operating temperature range	-40°C to +60°
Storage temperature range	-40°C to +60°
Humidity	Max. 95% (non-condensing)
Protection class	IP22

Share your knowledge of this product. Be the first to write a review »

ENVIRONMENTAL