Home > Brands > Victron Energy
Choose a sub category:
Sort By:
Page of 7
Victron Energy BlueSolar Panels Victron Energy VE.Direct to global remote interface Victron Energy CAN-bus Temp. Sensor
Low voltage-temperature coefficient enhances high-temperature operation.
Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
Victron Energy VE.Direct to global remote interface The CAN-bus Temp. Sensor is a battery temperature sensor for the Buck-Boost DC/DC converter range and is an essential accessory when the Buck-Boost DC/DC converter is connected to a LFP lithium battery.
Victron Energy VE.Direct to RS232 interface Victron Energy Interface 1140 Victron Energy VE.Direct to VE.CAN interface
VE.Direct to RS232 interface When the Interface 1140 is connected to the alternator AC it can measure ripple/frequency. The VE.Direct to VE.CAN interface cable can be used to make BMV-700 information available on a VE.Can network. Where it can be read by a Color Control GX for example.
Victron Energy MULTIPLUS 230 VOLT 3000VA INVERTER WITH BUILT-IN 120A CHARGER Victron Energy Clamp connector Victron Energy Wall Mount for Blue Smart IP65 Charger
The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. The clamp connector with fuse is an accessory for the Blue Smart IP65 Chargers. This Wall Mount will be especially useful if you like to keep your smart charger handy - above your workshop bench, for example. Now the charger can be used without even moving it!
Victron Energy Rubber bumper for IP65 Charger Victron Energy M6/M8 eyelet connector Victron Energy RJ12 UTP Cable
The IP65 Charger is already protected against dust, and water spray - now you can protect it from accidental damage too. This rubber bumper allows it to withstand the knocks and bangs of workshop life. The M6/M8 eyelet connector with fuse is an accessory for the Blue Smart IP65 Charger with DC connector. A cable to connect the BMV shunt to the BMV head unit. A RJ12 cable ships standard with a BMV battery monitor, but if this cable is too long or too short it can be replaced by one of these cables, lengths available from 0.3 up to 30 meters.
Victron Energy RJ45 UTP Cable Victron Energy Fuses & fuse holders Victron Energy USB extension cable one side right angle
A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device. Besides an assortment of ANL, MIDI and MEGA fuses, we feature three different types of fuse holders, Simple single fuse holders, a six-way fuse holder and modular single fuse holders. Some of the USB plugs on our cables are too long to fit in the Wall mount box with a Color Control GX. Use this USB extension cable. Available in 0,3 m length.
Victron Energy 2 meter extension cable Victron Energy VE.Direct TX digital output cable Victron Energy VE.Can RJ45 terminator
The 2 meter extension cable is an accessory of the Blue Smart IP65 Charger with DC connector. The VE.Direct TX digital output cable can be used in combination with the BlueSolar and SmartSolar MPPT chargers. It supports the following applications: The VE.Can RJ45 terminator comes in a bag of two when ordered separately. The terminators are also included with some products, for example with the CANUSB.
Victron Energy Temperature Sensor for BlueSolar PWM-Pro Victron Energy BlueSolar PWM-Pro to USB interface cable Victron Energy 12V cigarette lighter plug
Temperature Sensor for BlueSolar PWM-Pro With the BlueSolar PWM-Pro to USB interface cable you can connect the BlueSolar PWM-Pro to your computer. The 12V cigarette lighter plug, with fuse, is an accessory for the Blue Smart IP65 Charger with DC connector. With this plug you can charge your vehicle battery via the cigarette lighter socket.
Victron Energy Battery Indicator Eyelet M8 Victron Energy VE.Direct cable Victron Energy GX Touch Wall Mount
The Battery Indicator Eyelet M8 is an accessory for the Blue Smart IP65 Chargers. The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model. Please check our pricelist for all available models. The GX Touch wall mount accessory allows easy mounting of the GX Touch on a solid wall. No drilling or cut-out is required, other than the three screws that fix the wall mount onto the wall.
Victron Energy VE.Can to CAN-bus BMS cable Victron Energy GX Touch 50 and 70 protection cover Victron Energy DIN35 adapter
Use this cable to connect a CAN-bus enabled battery, not from Victron, to a Victron system. There are two types, A and B. See the manual for details on which cable to use for which brand of batteries. The GX Touch 50 & 70 protection cover prevents damage from UV light during prolonged exposure to the sun. DIN-Rail adapter to easily mount a device on a DIN-Rail. Suitable for the Cerbo GX.
Victron Energy Orion-Tr DC-DC Converters Non-isolated Victron Energy RJ45-splitter 1xRJ45 male/15cm cable/2xRJ45 female Victron Energy Inverting remote on-off cable
High efficiency - Using synchronous rectification, full load efficiency exceeds 95%. IP43 protection - When installed with the screw terminals oriented downwards. Screw terminals - No special tools needed for installation. This splitter is used to connect the MultiPlus 500VA - 1600VA range in parallel and 3 phase configurations, or in other installations where multiple VE.Bus ports are required. Use this cable to connect the (discontinued) Phoenix Inverter 12/180, 24/180, 12/350 or 24/350 to a VE.Bus BMS or a BlueSolar MPPT Charger that features a load output