Bluetooth adapter for Volthium batteries only. The Bluetooth dongle communicates with the battery's BMS to broadcast, via its internal Bluetooth chip with a 40 feet unobstructed range, the data broadcasted by the data port on the battery.

Compatible batteries are :

• All 12V100AH batteries with an XLR communication port on top
• All 12V200AH batteries with two XLR communication ports on top
• All 12V300AH batteries with two XLR communication ports on top
• All 12V400AH batteries with RJ45 ports
• All WALLMOUNT 24V200AH batteries with one XLR communication port on the front.
• All batteries with a yellow top (2022 or newer)

This Bluetooth dongle has a total of 3x RJ45 female ports, and one DC input port.

• The DC port (green) is for power supply. The accepted voltage is in the range of 10V to 59V.
• The RJ45 port, on the same side as the DC connector, is used in case only one battery is to be monitored with the Bluetooth module.

Do not connect a battery to this port if the Bluetooth module is used with the Communication HUB module.

Series of 2 RJ45 ports (Daisy-Chain CAN)

• They are used to interconnect the Volthium boxes on the CAN network
  For example; The "Communication HUB" box, which would be used to connect a battery bank (energy bank)
• Could also be used to connect the "Closing Loop", which is a small black RJ45 connector.

APP Stores (coming soon)

• Can be used alone
• Range of 40 feet
• Can be paired with the Communication HUB ($) to read 4 batteries simultaneously
• Compatible with a wide variety of Volthium batteries

• 1x Dongle Bluetooth
• 1 X flat RJ45 Network cable 6 inch (patch cord)
• 1X DC power cable
• 1x XLR - RJ45 male cable