 |
 |
 |
|
Our 6 store locations may sell for less if you are able to pick up your battery.
For Dealer and volume purchase enquirers CLICK HERE.
All requests for quotation will be processed within 24hrs eastern standard time, please indicate part, quantity required and your shipping destination commercial quotations.
* Includes shipping to any Canadian provinces except Quebec and the Territories, please contact online for shipping information to those locations.
Inverters allow you to power domestic equipment - requiring 230V/120V AC - using 'leisure' or 'automotive' batteries rated at 12V, 24V or 48V DC.
Models:
250VA, 375VA, 500VA, 800VA, 1200VA
VE.Direct communication port
The VE.Direct port can be connected to:
- A computer (VE.Direct to USB interface cable needed)
- Apple and Android smartphones, tablets, MacBook's and other devices (VE.Direct Bluetooth Smart dongle needed)
Fully configurable:
- Low battery voltage alarm trip and reset levels
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage 210 - 245V
- Frequency 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
Monitoring:
- In- and output voltage, % load and alarms
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two-pole connector, or between battery plus and the left-hand contact of the two-pole connector.
LED diagnosis
Please see manual for a description.
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters, we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.
Available with different output sockets
Phoenix Inverter
12 Volt 24 Volt 48 Volt |
12/250
24/250
48/250 |
12/375
24/375
48/375 |
12/500
24/500
48/500 |
12/800
24/800
48/800 |
12/1200
24/1200
48/1200 |
| Cont. power at 25°C (1) |
250VA |
375VA |
500VA |
800VA |
1200VA |
| Cont. power at 25°C / 40°C |
200 / 175W |
300 / 260W |
400 / 350W |
650 / 560W |
1000 / 850W |
| Peak power |
400W |
700W |
900W |
1500W |
2200W |
| Output AC voltage / frequency (adjustable) |
230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1% |
| Input voltage range |
9,2 - 17 / 18,4 - 34,0 / 36,8 - 62,0V |
| DC low shut down (adjustable) |
9,3 / 18,6 / 37,2V |
| DC low restart and alarm (adjustable) |
10,9 / 21,8 / 43,6V |
| Battery charged detect (adjustable) |
14,0 / 28,0 / 56,0V |
| Max. efficiency |
87 / 88 / 88% |
89 / 89 / 90% |
90 / 90 / 91% |
90 / 90 / 91% |
91 / 91 / 92% |
| Zero-load power |
4,2 / 5,2 / 7,9W |
5,6 / 6,1 / 8,5W |
6 / 6,5 / 9W |
6,5 / 7 / 9,5W |
7 / 8 / 10W |
| Default zero-load power in ECO mode (default retry interval: 2,5 s, adjustable) |
0,8 / 1,3 / 2,5W |
0,9 / 1,4 / 2,6W |
1 / 1,5 / 3,0W |
1 / 1,5 / 3,0W |
1 / 1,5 / 3,0W |
| ECO mode stop and start power setting |
Adjustable |
| Protection (2) |
a - f |
| Operating temperature range |
-40 to +65°C (fan assisted cooling) Derate 1,25% per °C above 40°C |
| Humidity (non-condensing) |
max 95% |
| ENCLOSURE |
| Material & Colour |
Steel chassis and plastic cover (blue Ral 5012) |
| Battery-connection |
Screw terminals |
| Maximum cable cross-section |
10mm2 / AWG8 |
10mm2 / AWG8 |
10mm2 / AWG8 |
25 / 10 / 10mm2 / AWG4 / 8 / 8 |
35 / 25 / 25mm2 / AWG2 / 4 / 4 |
| Standard AC outlets |
230V: Schuko (CEE 7/4), IEC-320 (male plug included) UK (BS 1363), AU/NZ (AS/NZS 3112) 120V: Nema 5-15R, GFCI |
| Protection category |
IP 21 |
| Weight |
2,4kg / 5,3lbs |
3,0kg / 6,6lbs |
3,9kg / 8.5lbs |
5,5kg / 12lbs |
7,4kg / 16,3lbs |
| Dimensions (h x w x d, mm) (h x w x d, inch) |
86 x 165 x 260 3.4 x 6.5 x 10.2 |
86 x 165 x 260 3.4 x 6.5 x 10.2 |
86 x 172 x 275 3,4 x 6,8 x 10,8 |
105 x 216 x 305
4.1 x 8.5 x 12.1
(12V model: 105 x 230 x 325) |
117 x 232 x 327
4.6 x 9.1 x 12.9
(12V model: 117 x 232 x 362) |
| ACCESSORIES |
| Remote on-off |
Yes |
| Automatic transfer switch |
Filax |
| STANDARDS |
| Safety |
EN-IEC 60335-1 / EN-IEC 62109-1 |
| EMC |
EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3 |
| Automotive Directive |
ECE R10-4 |
1) Nonlinear load, crest factor 3:1
2) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f) DC ripple too high |
|
|
|
 |
|
 |
|
