|
|
|
|
Our 6 store locations may sell for less if you are able to pick up your battery.
For Dealer and volume purchase enquirers CLICK HERE.
All requests for quotation will be processed within 24hrs eastern standard time, please indicate part, quantity required and your shipping destination commercial quotations.
* Includes shipping to any Canadian provinces except Quebec and the Territories, please contact online for shipping information to those locations.
The Inverter RS Smart is a powerful 48 VDC, 6 kVA 230 VAC inverter. It features a modern design and high frequency technology, weighing only 11kg and has excellent efficiency, low standby power, and very quiet operation.
The inverter is equipped with a display to read out battery and inverter details. These parameters can also be read out via Bluetooth by the VictronConnect app. In addition to this, the inverter has a VE.Can Port, for connection to a GX device for system monitoring.
Models:
6000VA
Light weight, efficient and quiet
Thanks to high frequency technology and a new design this powerful inverter weighs only 11kg. In
addition to this it has an excellent efficiency, low standby power, and a very quiet operation.
Display and Bluetooth
The display reads battery and inverter parameters.
The same parameters can be accessed with a smartphone or other Bluetooth enabled device. In
addition, Bluetooth can be used to set up the system and to change settings with VictronConnect.
VE.Can and VE.Direct port
For connection to a GX device for system monitoring, data logging, and remote firmware updates.
I/O Connections
Programmable Relay, temperature sensor and voltage sensor connections. The remote input can
also be configured to accept the Victron smallBMS.
Inverter RS Smart
|
48/6000
|
INVERTER
|
DC Input voltage range
|
38 – 64 V (4)
|
Output
|
Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0.1% (1)
|
Continuous output power at 25°C
|
Increases linearly from 4800 W at 46 VDC to 5300 W at 52 VDC
|
Continuous output power at 40°C
|
4500W
|
Continuous output power at 65°C
|
3000W
|
Peak power
|
9 kW for 3 seconds
|
Short-circuit output current
|
50A
|
Maximum efficiency
|
96.5% at 1 kW load 94% at 5 kW load
|
Zero load power
|
20W
|
GENERAL
|
Parallel and 3-phase operation
|
No
|
Programmable relay (3)
|
Yes
|
Protection (2)
|
a - f
|
Data Communications Ports
|
VE.Direct port and VE.Can port
|
Bluetooth frequency
|
2402 – 2480 MHz
|
Bluetooth power
|
4dBm
|
General purpose analogue/digital in port
|
Yes, 2x
|
Remote on-off
|
Yes
|
Operating temperature range
|
-40 to +65°C (fan assisted cooling)
|
Humidity (non-condensing)
|
max 95%
|
ENCLOSURE
|
Material & Colour
|
steel, blue RAL 5012
|
Protection category
|
IP21
|
Battery-connection
|
M8 bolts
|
230 V AC-connection
|
Screw terminals 13 mm2 (6 AWG)
|
Weight
|
11 kg
|
Dimensions (hxwxd)
|
425 x 440 x 125 mm
|
STANDARDS
|
Safety
|
EN-IEC 60335-1, EN-IEC 62109-1, EN-IEC 62109-2
|
Emission, Immunity
|
EN 55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
|
1) Can be adjusted to 60 Hz
2) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f) 230 VAC on inverter output
3) Programmable relay which can be set for general alarm, DC under voltage or genset start/stop function. DC rating: 4A up to 35VDC and 1A up to 70VDC 4) Minimum start-up voltage is 41V. Inverter shutdown can be set as low as 32V DC, but may shut down on low AC output voltage (due to load). Overvoltage disconnect is 65.5V.
|
|
|
|
|
|
|
|