 |
 |
 |
|
Our 6 store locations may sell for less if you are able to pick up your battery.
For Dealer and volume purchase enquirers CLICK HERE.
All requests for quotation will be processed within 24hrs eastern standard time, please indicate part, quantity required and your shipping destination commercial quotations.
* Includes shipping to any Canadian provinces except Quebec and the Territories, please contact online for shipping information to those locations.
BlueSolar PWM-Pro
The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable.
- Lighting control function, fully programmable.
- Three stage battery charging (bulk, absorption, float), fully programmable.
- Integrated battery monitor function (Remote Panel needed to display state of charge).
- Load output with low voltage disconnect and manual control (default setting).
- Optional external temperature sensor.
- Load output protected against over load and short circuit.
- Protected against reverse polarity connection of the solar panels and/or battery.
- Day/night timing options: see manual Remote Panel for details.
BlueSolar PWM-Light
- Load output with low battery voltage disconnect function.
- Lighting control function, one timer only.
- Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting.
- Three stage battery charging (bulk, absorption, float), not programmable.
- Load output protected against over load and short circuit.
- Protected against reverse polarity connection of the solar array and/or battery.
- Day/night timing options: see manual for details
Models: 12/24/48 Volt
- Lighting control function
- Three stage battery charging (bulk, absorption, float)
- Load output protected against over load and short circuit.
- Protected against reverse polarity connection of the solar array and/or battery.
| BlueSolar PWM-Light |
12/24-5 |
12/24-10 1 |
2/24-20 |
12/24-30 |
| Battery Voltage |
12/24 V with automatic system voltage detection |
| Rated charge current |
5A |
10A |
20A |
30A |
| Automatic load disconnect |
Yes |
| Maximum solar voltage |
28V / 55V (1) |
| Self-consumption |
< 10 mA |
| Load output |
Manual control + low voltage disconnect |
| Protection |
Battery reverse polarity (fuse) Output short circuit Over temperature |
| Overload protection |
Shut down after 60 s in case of 130% load |
| Shut down after 5 s in case of 160% load |
| Short circuit: immediate shut down |
| Grounding |
Common positive |
| Operating temp. range |
-20 to +50°C (full load) |
| Humidity (non-condensing) |
Max 95% |
| BATTERY |
| Charge voltage 'absorption' |
14.2V / 28,4V |
| Charge voltage 'float' |
13.8V / 27,6V |
| Low voltage load disconnect |
11,2V / 22,4V |
| Low voltage load reconnect |
12,6V / 25,2V (manual)
13,1V / 26,2V (automatic) |
| ENCLOSURE |
| Protection class |
IP20 |
| Terminal size |
5 mm2 / AWG10 |
| Weight |
0,15kg |
0,2kg |
| Dimensions (h x w x d) |
70 x 133 x 33,5 mm (2.8 x 5.3 x 1.3 inch) |
| STANDARDS |
| Safety |
IEC 62109-1 |
| EMC |
EN 61000-6-1, EN 61000-6-3, ISO 7637-2 |
1) For 12V use 36 cell solar panels For 24V use 72 cell solar panels or 2x 36 cell in series
2) The controller switches to the lower float voltage level 2 hours after the absorption voltage has been reached. Whenever the battery voltage becomes lower than 13V, a new charge cycle is triggered. |
| BlueSolar PWM-Light |
48-10 |
48-20 |
48-30 |
| Battery Voltage |
48V |
| Rated charge current |
10A |
20A |
30A |
| Automatic load disconnect |
Yes |
| Maximum solar voltage |
100V |
| Self-consumption |
< 10 mA |
| Load output |
Manual control + low voltage disconnect |
| Protection |
Battery reverse polarity (fuse)
Output short circuit
Over temperature |
| Overload protection |
Shut down after 60 s in case of 130% load |
| Shut down after 5 s in case of 160% load |
| Short circuit: immediate shut down |
| Grounding |
Common positive |
| Operating temp. range |
-20 to +50°C (full load) |
| Humidity (non-condensing) |
Max 95% |
| BATTERY |
| Bulk charge |
58,0V (1) |
| Charge voltage 'absorption' |
56,8V |
| Charge voltage 'float' |
55,2V |
| Low voltage load disconnect |
44,8V |
| Low voltage load reconnect |
50,4V (manual)
52,4V (automatic) |
| ENCLOSURE |
| Protection class |
IP20 |
| Terminal size |
6 mm2 / AWG10 |
| Weight |
0,17kg |
| Dimensions (h x w x d) |
95 x 140 x 33,5 mm |
| STANDARDS |
| Safety |
IEC 62109-1 |
| EMC |
EN 61000-6-1, EN 61000-6-3 |
| BlueSolar PWM-Pro |
12/24-5 |
12/24-10 1 |
2/24-20 |
12/24-30 |
| Battery Voltage |
12/24 V with automatic system voltage detection |
| Rated charge current |
5A |
10A |
20A |
30A |
| Automatic load disconnect |
Yes |
| Maximum solar voltage |
28V / 55V (1) |
| Self-consumption |
< 10 mA |
| Load output |
Manual control + low voltage disconnect |
| Protection |
Battery reverse polarity (fuse)
Output short circuit
Over temperature |
| Battery temperature sensor |
Optional (article SCC940100100) |
| Temperature compensation |
-30 mV / °C resp. -60 mV / °C (if temperature sensor installed) |
| Remote panel |
Optional (article SCC900300000) |
| Grounding |
Common positive |
| Operating temp. range |
-20 to +50°C (full load) |
| Humidity (non-condensing) |
Max 98% |
| DEFAULT SETTINGS |
| Absorption charge (2) |
14.2V / 28,4V |
| Float charge (2) |
13.8V / 27,6V |
| Equalization charge (2) |
14,6V / 29,2V |
| Low voltage load reconnect |
11,1V / 22,2V |
| Low voltage load reconnect |
12,6V / 25,2V |
| ENCLOSURE |
| Protection category |
IP30 |
| Terminal size |
4mm2 |
4mm2 |
10mm2 |
10mm2 |
| Weight |
0,13kg |
0,13kg |
0,3kg |
0,5kg |
Dimensions
(h x w x d) |
138x70x37 mm 5.4x2.7x1.4 inch |
138x70x37 mm 5.4x2.7x1.4 inch |
160x82x48 mm 6.3x3.2x1.9 inch |
200x100x57 mm 7.9x4.0x2.3 inch |
| STANDARDS |
| Safety |
IEC 62109-1 |
| EMC |
EN 61000-6-1, EN 61000-6-3, ISO 7637-2 |
1) For 12V use 36 cell Solar panels
For 24V use 72 cell Solar panels |
|
|
|
 |
|
 |
|
