 |
 |
 |
|
Our 6 store locations may sell for less if you are able to pick up your battery.
For Dealer and volume purchase enquirers CLICK HERE.
All requests for quotation will be processed within 24hrs eastern standard time, please indicate part, quantity required and your shipping destination commercial quotations.
* Includes shipping to any Canadian provinces except Quebec and the Territories, please contact online for shipping information to those locations.
Depending on the application, clamps, eyelets or a cigarette plug (all included) can be connected to the charger.
Low power charger for 6V and 12V batteries:
IP65 Charger 6V/12V-1,1A
Charger for 12V batteries with two charge current options:
IP65 Charger 12V/4A - 12V/0,8A
Models:
6 / 12 Volt
- DC connector
Depending on the application, clamps, eyelets or a cigarette plug (all included) can be connected to the charger.
- Less maintenance and aging when the battery is not in use: the Storage Mode
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 13,2 V to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
- Protected against overheating and reverse polarity connection
The output current will reduce as temperature increases up to 40°C, but the charger will not fail. Output relay protects against reverse polarity connection.
|
Automotive IP65 Battery Charger 12V/4A - 12V/0,8A with DC connector
|
|
Input voltage range
|
200-265 V
|
|
Frequency
|
50/60Hz
|
|
Charge voltage 'absorption'
|
14,4 or 14,7 V
|
|
Charge voltage 'float'
|
13,6 V
|
|
Charge voltage 'storage'
|
13,2 V
|
|
Charge current
|
4 A or 0,8 A
|
|
Can be used as power supply
|
No [output relay]
|
|
Back current drain
|
0,25 Ah/month (0,3 mA)
|
|
Protection
|
Reverse polarity, temperature
|
|
Operating temp. range
|
-20 to +40°C (full rated output up to 25°C)
|
|
Humidity (non condensing)
|
Max 95 %
|
|
ENCLOSURE
|
|
Material & Colour
|
PC Black
|
|
Battery-connection
|
Black and red cable of 1,2 meter. Connects to battery clamps, M6 eyelets or 12 V plug (included)
|
|
230 V AC-connection
|
Cable of 1,5 meter with CEE 7/7 plug
|
|
Protection category
|
IP65
|
|
Weight
|
0,56 kg
|
|
Dimensions (h x w x d)
|
42 x 61 x 185 mm
|
|
STANDARDS
|
|
Safety
|
EN 60335-1, EN 60335-2-29
|
|
Emission
|
EN 55014-1, EN 61000-6-3, EN 61000-3-2
|
|
Immunity
|
EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
|
|
Automotive IP65 Battery Charger 6V/12V-1,1A with DC connector
|
|
Input voltage range
|
200-265 V
|
|
Frequency
|
50/60Hz
|
|
Charge voltage
|
7,2 or 14,4 V
|
|
Battery capacity range
|
1,2 Ah - 30 Ah
|
|
Charge current
|
1,1 A max
|
|
Can be used as power supply
|
No (output relay)
|
|
Back current drain
|
3 Ah/month (4 mA)
|
|
Protection
|
Reverse polarity, temperature
|
|
Operating temp. range
|
-20 to +40°C (full rated output up to 25°C)
|
|
Humidity (non condensing)
|
Max 95 %
|
|
ENCLOSURE
|
|
Material & Colour
|
PC Black
|
|
Battery-connection
|
Black and red cable of 1,2 meter. Connects to battery clamps, M6 eyelets or 12 V plug (included)
|
|
230 V AC-connection
|
Cable of 1,5 meter with CEE 7/7 plug
|
|
Protection category
|
IP65
|
|
Weight
|
0,56 kg
|
|
Dimensions (h x w x d)
|
42 x 61 x 185 mm
|
|
STANDARDS
|
|
Safety
|
EN 60335-1, EN 60335-2-29
|
|
Emission
|
EN 55014-1, EN 61000-6-3, EN 61000-3-2
|
|
Immunity
|
EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
|
|
|
|
 |
|
 |
|
